Produse pentru • i (570)

Rolling and friction bearing lubrication, even at high temperatures Lubrication for bearings with contact to cleaning agents or disinfectants For mechanical units such as levers, joints and hinges, also under strong water effect Advantages and benefits NSF H1 registered (OKS 480 & OKS 481) High shear stability prevents thinning out of the grease under extreme mechanical loads such as during vibrations Excellent wear protection and very good high-pressure properties The calcium sulphonate complex soap ensures excellent water resistance and very good corrosion protection Broad temperature application range (-30°C to +160°C) High temperature and oxidation stability through fully synthetic base oil Very high resistance to water-alkaline or acidic disinfectants and cleaning agents MOSH/MOAH-free Operating temperature:-30 °C → 160 °C NLGI grade:2 DN factor (dm x n):400,000 mm/min Base oil viscosity (40 °C):100 mm²/s Four-ball test rig (welding load):4,000 N

Piping and hoses, for example steel bottles, compressors, breathing devices, oxyacetylene gas and inert-gas arc welding devices and burners Fittings, flanges, valves, screwed connections, soldered and welded connections of pressure gas systems and lines Suitable for compressed air, refrigerant, acetylene, butane, natural gas, carbon dioxide, gaseous oxygen, propane, town gas, nitrogen, hydrogen and, ammonia Advantages and benefits Acts non-corrosive Allows direct visual inspection of the leakage point through bubble formation Also available as spray version OKS 2801 Spray version tested by the DVGW in accordance with DIN EN 14291 Spray version suitable for spraying overhead Operating temperature:up to +50 °C

For fast determination of thermally-dependent interruptions in electrical circuits or components Avoidance of heat damage when soldering electrical components For heat protection of neighbouring components Shrinking of inner parts for removal of seized taper plugs, pins, plugs or bearing bushes Generation of shrink seats for assembly of inner parts For rapid temperature adjustment during materials testing For simulation of cold-starting conditions with motor-vehicle automatic starting systems Advantages and benefits Highly effective due to outstanding undercooling effect Excellently suited for simple cooling of parts Immediate cooling of smaller surfaces or parts down to –45°C depending on spraying duration Evaporates very quickly without residues Also provides good cleaning effect No negative affects on plastics and insulating materials

Lubrication, cleaning and protection of bright metal surfaces, e.g. of precision machine tools, measuring equipment, mechanisms in precision mechanics and optics, of precision instruments Can be used at machine elements of all types, for example sliding parts or slideways, at threads, locks, hinges, joints, drives Versatile use over the full range of care, conservation and maintenance applications Advantages and benefits Highly effective due to good wetting, dissolving and protective ability Good creep properties Behaves neutrally with respect to plastics, elastomers and paints Good protection against corrosion-causing moisture and wetness Resin and acid-free OKS 700 is also suitable for use with the refillable Airspray system Also available as spray version OKS 701 Operating temperature:-50 °C → +100 °C Density (20 °C):0.84 g/ml Viscosity (40 °C):17.5 mm²/s

Lubrication of open pinion gears which are highly subject to wearing due to corrosion and continuous soiling, e.g. on construction machines, spindle presses, crushers, mills, windlasses, rubbish disposal devices, ship´s lifting jaws or water structures Wire cables subject to outdoor weathering, e.g. on crane systems, lifts and aerial tramways, ship´s and offshore equipment for diverse types of sealing lubrication, including of coarse chains and chain transporters Advantages and benefits Highly effective due to outstanding wetting and lubricating properties Decreased friction and wear, and therefore reduction of necessary repair times Economical due to thrifty consumption as a result of small application quantities and time-saving use due to advantageous spray form Dry, elastic film with high adhesive strength prevents adhesion of dust and dirt Waterproof and has good corrosion protection properties Operating temperature:-30 °C → +100 °C

Driving and conveyor chains of all designs in open or semi-enclosed operation without a re-lubrication device Roller chains such as motorcycle and bicycle chains Stacker truck chains as well as single or multiple flat-link articulated chains without a re-lubrication device Rope drives and wire pulls; for example, standing, hoisting, traction or winch ropes in hoisting gears, elevators, lifts or mountain railways Flexible drives, bowden and spring cables Moving machine parts exposed to outdoor weathering, such as toothed gearing, guides, closing mechanisms, hinges or sliding surfaces Advantages and benefits Highly effective due to outstanding creep and gap penetration properties Highly adhesive and resistant to throwing off Contains Moₓ-Active for increased performance Excellent wear protection Very good resistance to cold and hot water as well as to saline solutions Excellent corrosion protection O-ring neutral Operating temperature:-30 °C → +200 °C Base oil viscosity (40 °C):300 mm²/s Four-ball test rig (welding load):2,400 N

Multipurpose oil for bearing, lever and joint lubrication Hydraulic oil for use in all areas in which physiologically harmless are required Compressor oil for piston compressors for prescribed oil ISO VG 100 Advantages and benefits NSF H1 registered Long economic operating times thanks to optimal additives against oxidation and ageing Good cold behaviour Resistant to cold and hot water, steam as well as disinfectants and cleaning agents For universal use due to long-term lubrication and high adhesive strength Good wear protection Tasteless and odourless Conforms to VDL requirements Operating temperature:-35 °C → +135 °C Density (20 °C):0.84 g/ml Viscosity (40 °C):100 mm²/s

Lubrication of rolling and friction bearings at operating temperatures around +170°C up to rotating speed limit For example, smaller bearings of exhaust-gas turbochargers, hot-air fans, hot-water pumps, washing machines and laundry dryers, as well as clutch pressure and release bearings etc. Also suitable for plastic/plastic sliding pairs Advantages and benefits Highly effective due to optimum temperature-stable silicone grease formula Excellently suited for grease lubricating points subject to changing temperature loads Broad range of uses outside normal grease performance areas Operating temperature:-40 °C → +200 °C NLGI grade:2 DN factor (dm x n):300,000 mm/min Base oil viscosity (25 °C):125 mm²/s Four-ball test rig (welding load):1,100 N

Assembly lubrication of machine parts, screw connections, fittings, flange and plug-in connections, guides, sliding and sealing surfaces of ovens, boilers, burners, motors, engines subject to high-temperature conditions Separating paste Advantages and benefits Excellently suited for preventing seizing and burning together Highly effective due to outstanding separating action and pressure absorption Good protection against ingress of splashing and condensed water Free of heavy metal compounds Good corrosion protection Excellent water resistance Wide operating temperature range Optimum ratio of screw tightening torque to achievable pre-tension Also available as spray version OKS 2351 For best adhesion, clean contamination and other lubricants from thread and slide surfaces. Best way is to clean mechanically first (for example, with a wire brush) and then with OKS 2610/OKS 2611 universal cleaning agent. Apply sufficient OKS 235 Operating temperature:-30 °C → +1,100 °C Thread friction (M10/8,8):µ total = 0.13

Increases tensile force by up to 50 % for all kinds of V-belts, round and flat belts on fans, compressors, pumps, ventilators, mills etc. Protects against drying out and wear, prevents belt squeaking and slip Advantages and benefits Increases service life Prevents squeaking Prevents slip Increases belt tension force Operating temperature:up to +80 °C

Parting agent at foundry operations injection moulding, blowing and extruding processes of plastics and elastomer Avoids the sticking of e.g. adhesives and sealing excess or water wetting Sliding agent against noisy rubbing of plastics, elastomers and metals together or against each other Lubrication of cutting edges in the paper, cardboard, veneer layer and textile processing machines For easy retracting of plastic and rubber profiles, e.g. in the door and window production Advantages and benefits High efficiency because of excellent netting of the surface and building of extremely thin lubricating films Separating effect with antistatic properties Manifold applications for permanent lubrication, protection, maintaining and impregnation Neutral behaviour against plastic and elastomers Resistant against water and atmospheric influences Operating temperature:-50 °C → +200 °C Density (20 °C):0.96 - 0.97 g/ml Viscosity (25 °C):100 mm²/s

Lubrication of dirt-sensitive sliding points in mechanisms Assembly lubrication with large lubricant reservoir, e.g. chucks in which a supplemental relubrication at longer intervals with grease guns is possible Advantages and benefits Excellently suited for dirt-free assembly and long-term lubrication Highly effective due to optimum solid lubricant combination Broad range of uses in area of parts sensitive to soiling Low consumption due to formation of highly effective lubricating films Good corrosion protection behaviour For best adhesion, clean contamination and other lubricants from thread and slide surfaces. Best way is to clean mechanically first (for example, with a wire brush) and then with OKS 2610 or OKS 2611 universal cleaning agent. Use a brush, spatula or similar to apply evenly a suitable quantity of paste to the head or nut contact surface and to the thread. The paste will also act as a sealant. Do not use paste instead of grease and mix only with suitable lubricants. Operating temperature:-25 °C → +125 °C Press-fit:µ = 0.14, no chatter Four-ball test rig (welding load):5,000 N Thread friction (M10/8,8):µ total = 0.09

Dry lubrication of most different materials sliding on resp. rubbing against each other like metals, wood, ceramics, rubber as well as paintable plastics For packing machines, sliding areas in the plastics and textile industry, rollers and chutes in the transport range, etc. Non-stick coating of all kinds of sealings and sealing areas to avoid sticking, squeaking of soft on hard materials (e.g. rubber on glass), for water-repellent impregnation of absorbing materials or as separating film for casting resin applications Advantages and benefits Thin, tack-free separating film with very good adhesive properties on prepared surfaces Best suitability for low-friction lubrication of all kind of materials in contact Colourless and odour-free antifriction coating with non-stick properties Operating temperature:-180 °C → +150 °C/+250 °C

For the long time- or for lifetime- lubrication of fast running roller and plain bearings as well as linear guides, threaded and ball screw spindles, small gears and similar components, exposed to high pressures and higher temperatures Advantages and benefits Good adhesive and good media resistant Good low-temperature behaviour, stress absorbing ability and smooth run at high speeds Good plastic compatibility The low start and running moment, especially at low temperatures, enables a high efficiency The good wear protection increases the life time of the part and makes sure a reliable functionFor best results clean the lubrication point with OKS 2610/OKS 2611 Universal Cleaner. Remove the corrosion protection media before initial filling. Fill the bearings in a way that all the functional surfaces are lubricated sufficiently. Slow moving bearings (DN-value < 50,000) should be filled completely. Fast running bearings (DN-value >400,000) should be filled Operating temperature:-50 °C → +130 °C NLGI grade:2 DN factor (dm x n):1,000,000 mm/min Base oil viscosity (40 °C):30 mm²/s Four-ball test rig (welding load):3,400 N

Lubrication of friction, rolling and pivoting bearings, splined shafts, knockout spindles and sliding surfaces of all kinds under heavy loads and a broad temperature range, as well as all sliding speeds permissible for grease lubrication Advantages and benefits Modern grease with a wide range of applications Supports sealing of bearings Good corrosion protection Resistant to ageing and oxidation Good resistance to pressure and water Available in the 120 cm³ ChronoLube cartridge For optimum effect, carefully clean the lubricating point, for example with OKS 2610/OKS 2611 universal cleaner. Before filling for first time, remove anti-corrosion agent. Fill the bearing such that all functional surfaces are certain of being greased. Fill normal bearings up to about 1/3 of the free space inside the bearing. Low-speed bearings (DN value < 50,000) and their housings should be filled completely. The bearing and machine manufacturer's instructions should be observed. Subsequent lubrication Operating temperature:-30 °C → +150 °C NLGI grade:2 DN factor (dm x n):350,000 mm/min Base oil viscosity (40 °C):100 mm²/s Four-ball test rig (welding load):2,800 N

Lubricating and sealing off tap cocks, labyrinth seals, stuffing boxes and packings Lubricating and sealing off fittings made of metal, plastic and ceramic, e.g. drain, cold- and hot-water fittings Long-term lubrication of heavily loaded press and guide plates, for example on telescope booms of mobile cranes As a lubricant for of threaded spindles on radiator thermostats Advantages and benefits Reduces wear Extension of the relubrication intervals High resistance to oxidation Noise and vibration-damping Resistant to cold and hot water, water vapour, lactic, formic, acetic and fruit acid, as well as alkaline and acidic cleaning agents and disinfectants Good elastomer and plastic compatibility For optimum adhesion, clean contamination and other lubricants from slide surfaces. Best way is to clean mechanically first and then with OKS 2610/OKS 2611 universal cleaner. Apply sufficient paste evenly with a brush, spatula, etc. The paste will also act as a sealant. Operating temperature:-20 °C → +150 °C Four-ball test rig (welding load):2,200 N

Special grease for the long-term lubrication of ball and plain bearings where electrical charge is possible, e.g. in electric engines, foil- stretching and foil-printing machines, etc. Advantages and benefits Long-term lubrication grease with a wide temperature range and good corrosion protection The special lubricating concept makes sure that electrostatic charges in roller bearing applications are destaticized through the grease, so that local discharges are avoided Proven especially for the lubrication of roller bearings below 1 ampere Operating temperature:-40 °C → +150 °C NLGI grade:2 DN factor (dm x n):1,000,000 mm/min Base oil viscosity (40 °C):150 mm²/s Specific resistivity:< 10,000 Ohm*cm

Lubrication of highly stressed and relatively slowly running gears where due to leakage a grease must be used instead of oil For drives under high and shock load Chain lubrication of e.g. hollow pins, chains in the conveyor and transport field, under the influence of water and vapour and at higher operation temperatures Bearing lubrication of roller and plain bearings at annealing furnaces and drying equipments, manipulators and robots, conveyor and cooling systems, machines of preserve industry, steam sterilizers, etc. Advantages and benefits Best use in corrosive operation conditions with high operation temperatures and high pressure and shock load Economically due to optimum formulation Reduces wear and thereby downtime and enables long-term lubrication Ropy, strongly adhesive, temperature and water resistant, noise dampening, high-load and shock absorbing Operating temperature:-15 °C → +160 °C NLGI grade:0-00 Base oil viscosity (40 °C):490 mm²/s

Dry lubrication with solid lubricants for long-lasting efficiency at low sliding speed and with high surface pressure Long-term lubrication with excellent protection against wear for increased service life of slide areas Fully effective even after longer downtimes; no adherence of dust and dirt Advantages and benefits High-strength long-term antifriction bonded coating with high efficiency through good adhesion on prepared surfaces Constant friction value of the sliding film even under extreme load Increased protection against wear of otherwise not accessible slide areas Operating temperature:-70 °C → +250 °C Press-fit:µ = 0.07, no chatter Thread friction (M10/8,8):µ total = 0.08

Lubrication of chains, hinges, joints, clamping and drying frames or slideways at higher temperatures Suitable for conveying systems in painting, stoving, drying and cooling bed installations Advantages and benefits Highly effective due to optimum wear protection and outstanding oxidation properties Resistant to water and steam Good creep properties Very good adhesion and lubrication effect with no tendency to drip Also available as spray version OKS 3521 For optimum effect, clean the surfaces. Best way is to clean mechanically first and then with OKS 2610/OKS 2611 universal cleaner. Apply OKS 352 with a brush, drip oiler or by immersion or using a suitable automatic lubrication system to locations to be lubricated. Spray OKS 3521 on evenly. Allow excess to drip off and wait for lubricant to penetrate before resuming operation. Observe the machine manufacturer's instructions. Assess the lubrication frequency and quantity on basis of service conditions Operating temperature:-10 °C → +250 °C Density (20 °C):0.90 g/ml Viscosity (40 °C):270 mm²/s Four-ball test rig (welding load):2,400 N

Lubrication of closed toothed gearing Liquid lubrication of chains, joints, guides, fittings Suitable for immersion-bath, immersion-bath circulation and injection lubrication Advantages and benefits NSF H1 registered Good oxidation and ageing stability through optimal additives Cold and hot water resistant Resistant to water steam, disinfectants and cleaning agents Wide operating temperature range Shear-stable and low-foaming Good wear protection Good corrosion protection Long economic operating times MOSH-/MOAH-free Operating temperature:-30 °C → +120 °C Density (20 °C):0.86 g/ml Viscosity (40 °C):460 mm²/s FZG damage level:power level > 12

Lubrication of closed toothed gearin Liquid lubrication of chains, joints, guides, rolling and friction bearings Suitable for immersion-bath, immersion-bath circulation and injection lubrication Advantages and benefits NSF H1-registered Good ageing and oxidation stability through optimal additives Cold and hot water resistant Resistant to water steam, disinfectants and cleaning agents Wide operating temperature range Shear-stable and low-foaming Good wear protection Good corrosion protection Long economic operating times MOSH-/MOAH-free Operating temperature:-30 °C → +120 °C Density (20 °C):0.86 g/ml Viscosity (40 °C):220 mm²/s FZG damage level:power level > 12

Hydraulic oil for use in all areas of the food processing technology Compressor oil for screw and multiple vane rotary vacuum pumps at required oil ISO VG 32 Lubrication of other machine elements, such as rolling and friction bearings in the food processing technology Advantages and benefits NSF H1 registered Long operating times through excellent oxidation stability Good low-temperature behaviour Wide operating temperature range Resistant to cold and hot water, water steam, disinfectants and cleaning agents Reduces friction and wear Good corrosion protection Free of mineral oil Conforms to VDL requirements Operating temperature:-45 °C → +135 °C Density (20 °C):0.83 g/ml Viscosity (40 °C):32 mm²/s

For sliding properties improvement of machine parts, apparates and precision machinery, especially for microfinished surfaces For incorporation in plastics, sealings, packages, sintered metals and improvement of sliding properties For long-term or possibly lifetime-lubrication Advantages and benefits Reduces friction and wear in a wide temperature range High effectiveness due to high affinity of MoS₂ to metals Low friction at highest load capacities Low consumption based on forming of extreme thin sliding films Not electrically conducting and not magnetic Chemically stable except against halogenated gases, concentrated sulphuric- and nitric acid For best adhesion, clean sliding surfaces. Best way is to clean mechanically first and then with OKS 2610 or OKS 2611 universal cleaner. Spray on evenly thin from 15-20 cm distance to the sliding surfaces. Operating temperature:-185 °C → +450 °C Particle size:2.5 - 5.0 µm, max. 15 µm

Masken mit Logo für den Alltag Ihrer Mitarbeiter. Lassen Sie hochwertige Van Laack oder Hakro Mund-Nasen-Masken mit Ihrem Logo besticken. Mundschutz mit Firmenlogo - schnell & zuverlässig Masken mit Logo für den Alltag Ihrer Mitarbeiter. Lassen Sie hochwertige Van Laack oder Hakro Masken mit Ihrem Logo besticken. Schnell & zuverlässig. Achtung - kein Medizinprodukt sondern wiederverwendbare Alltagsmasken Stärken Sie die Corporate Identity Ihres Unternehmens durch Masken bedruckt mit Ihrem Firmenlogo!

Preservation of bare metal surfaces of all kinds, which are stored for longer periods and are subject to effects of weathering Protected parts retain their decorative appearance, as no surface discolouration occurs Ideal on-call and storage protection for spare parts with possibility of direction installation Advantages and benefits Highly effective due to good film-forming properties with lasting water-repelling Excellently suited for producing non-slip dry, greenish protective films Outstanding corrosion and oxidation protection with lubricating effect No removal prior to commissioning, as compatible with all lubricants Waterproof and resistant to weathering, suitable for all climate zones Can be welded without degreasing Easily removable before coating Operating temperature:-40 °C → +70 °C Salt spray test:> 1,000 h with 10 µm layer thickness Layer thickness:approx. 10 µm for one-time application

Lubrication of chains and machine elements operated outdoors Multi Oil also at higher temperatures Advantages and benefits Good lubricating properties Good creep capacity Biodegradable VOC-free Can be used up to 160°C Silicone-free Percentage of renewable raw materials > 90% Operating temperature:-5 °C → +160 °C Density (20 °C):0.92 g/ml Viscosity (40 °C):35 - 40 mm²/s

Sealing lubrication of sliding surfaces, e.g. ground-in parts such as taper plugs, dosing plungers, valves, beer taps etc. Maintenance lubrication of plastic and rubber parts, as well as stuffing boxes, lip seals and O-rings Rolling and friction bearing lubrication in slow-running areas, toothing or chains on filling and packaging machines, stirring and grinding mechanisms etc. Advantages and benefits Highly effective due to proven lubricant formula Fulfils most demanding hygienic requirements. Reduced maintenance and lubricant costs due to possible long-term lubrication Resistant to hot and cold water, water vapour, wateryalkaline and acidic disinfectants and cleaning agents Neither hard residues result, nor is there a tendency to soften or drip due to pasteurisation or sterilization Odour and taste-free, and does not affect the properties of beer foam Toxicologically harmless as defined in German LFGB Operating temperature:-10 °C → +140 °C NLGI grade:3 Base oil viscosity (40 °C):1,600 mm²/s

Drain tap for OKS products For low-viscosity OKS products in 5 l canisters Advantages and benefits Resistant to OKS products Thread, internal:Ø 50.4mm ±0.4 Thread, external:Ø 55.4mm ±0.4 Weight:42.2g

Lubrication of chains, joints and slideways at high temperatures Conveying systems in painting, stoving and drying systems Food-processing machines Advantages and benefits Can be used up to 250°C NSF H1 registered, conforms to the requirements of the Hazard Analysis Critical Control Points (HACCP) method in the food processing industry Good adhesion on metal surfaces Excellent water resistance Excellent oxidation properties Excellent wear protection Also available as spray version OKS 3571 MOSH/MOAH-free Operating temperature:-10 °C → +250 °C Density (20 °C):0.87 g/ml Viscosity (40 °C):300 mm²/s